linkdelight_NA 　 　 　 　 Wireless Remote C3 for Canon EOS 1D 1DS Mark II III Item information:
　 You are bidding on a brand new wireless remote C3 for Canon 20D 30D 40D. It can completely replace the original Canon RS-80N3 and have more powerful functions. The product combines the function of remote control and shutter release cable. With this multi-functional wireless remote you can strongly trigger the camera's shutter release from a long effective distance up to 100m (320ft).
　 Energy Saving Design, Long Working Hour
• With its low voltage and energy saving design, you don't have to change the battery often.
• With a new battery, the receiver standby time is about 1000 hours.
• With a new battery, the remote control can trigger about 20,000 times.

Shutter Release Function: Different from the infrared remote control, this radio-triggered wireless remote has function of shutter release, two modes are available:

A. Half-press the transmitter's button for auto-focus (the LED on both transmitter and receiver turns green), then press it completely for taking picture (the LED turns red).

B. Bulb shutter, setting you camera to Bulb mode, and long press the transmitter's button, bulb starts since the LED turns red, repress when the long-exposure is completed.

Some circumstances to use this Multi-function, high-tech remote :
• Use in family or group, self-portrait or including your children and pets photography .
• Use for macro shooting - eliminates camera shake or in dangerous locations.
• Use in B mode for night piece shooting.
• Use in children photography: grasp a breath when they enjoy their selves.
• Use in wild animal photography and can easily conceal yourselves somewhere else.
　 Features:
Single shooting: Set to On position on receiver (red light on). Half-pressing shutter button on transmitter for focusing (monitor light turns to green). Fully pressing to take photo (monitor lights of transmitter and receiver turn to red)

Two seconds delay: Set to 2S position on receiver (red light on). Half-pressing shutter button on transmitter for focusing (both lights turn green) and fully pressing shutter button (light turns red). Camera will take photo in 2 seconds

Continuous shooting: Set camera on continuous mode. Set to On position on receiver. Fully press shutter button on transmitter (light on transmitter turns red) for 3 seconds until monitor red light off. The camera operates on C mode. To release C mode, half-pressing the button on transmitter

Bulb mode- for long exposure:
1. Switch the camera to Bulb mode.
2. Press it all the way for 3 seconds until the Red LED on the remote control goes off.
3. The receiver is in bulb mode now. (Indicated by Red LED on the receiver)
4. Press the button again to close the shutter.

Multi-Channels Control: It has strong anti-interference function and has 16 channels for choose. It is extremely useful for several photographers working nearby. Each photographer could choose their own channel to trigger off shutter release of the camera they are going to use without triggering others' because of overlapping signals.

Use receiver as wired remote without transmitter:
Single Shooting: Set switch on receiver to any position of OFF/ON/2S and press shutter button. Or just switching to B position for taking photo

Continuous shooting: Set camera on C mode first. Set switch on receiver to any position of OFF/ON/2S and fully press shutter button. Camera works on C mode until free of your hand. Or you just switch to B position and camera works on C mode until take the switch off B position
Specification:　

Compatible with Models:
Canon EOS 1D Mark III, 1D Mark II N, 1Ds Mark II, 1D Mark II, 1Ds, 1D;
20D, 30D, 40D; EOS 1V, EOS 3; EOS D30, D60 etc. Contains:

• Remote Shutter Transmitter x1
• Alkaline Battery 23A 12V x1
• Remote Shutter Receiver x1
• Original Manufacture Package

FAQ

Q： Why choose wireless over wired communication solutions?

The biggest advantages of wireless are cost, convenience and safety.
Wireless communication systems can be installed at a fraction of the cost of wiring. The cost of labor to measure, cut and wire a machine or search for faulty connections during repair can add up. By comparison, wireless systems are easy to install and configure; only a power and ground wire are needed throughout a vehicle, making diagnostics and maintenance a breeze.
Wireless remote controls allow a machine operator to control and run a machine in hazardous zones from a safe, advantageous location. This also allows an operator to more readily predict potential dangers, such as proximity to power lines, and quickly adjust operations to suit.

Q: How to test the triggers if it does not work well?

First, please change batteries for receivers, pay attention to the direction when put batteries in the magazine.
Second, please make sure the connection between the transmitter and the camera, the receiver and the flash/lamp is tight enough, any loose may cause trigger does not work.
Please do not hesitate to contact us if there is a problem about the trigger.

Q: What is the different between this item and the Aputure wireless remote shutter?

The biggest different is there is shutter button on the receiver of this unit, it triggers the camera separately.
Consignment

1. We are happy to accept orders from Europe, North American, Australasia, and other countries, certain country restrictions may apply.
2. Parcel will be shipped to you by Registered Airmail that generally takes 7-14 business days (weekend is not included) to deliver on your hands.
3. Please allow up to 48 hours preparation for shipping, although usually item send within 24 hours after payment confirmed.
4. We offer shipment combine to buyer whom ordered more than one items once time from same site, to save a part of postage.
5. We will not be responsible for item loss because of wrong or undeliverable address.
6. All of parcels will be declaimed as ‘Gift', and we always try the best to Legally Minimize your import duties (or GST or V.A.T. or other Taxes). In the most cases of shipping, there is none duty payable. However, if any additional charges generated for customs clearance must be borne by customer.
   

Payment

　

　 Return/Replace Policy

LinkDelight offers a No-hassle exchange within 30days only if your goods are found to be defective by manufacturer. The faulty item will be exchanged for the same model once the return guidelines are followed:

1. We might ask buyer to test the item in order to eliminate improper use, buyer has responsibility to cooperate and follow the test correctly.
2. The item must be returned in NEW condition and with all the original manufacturers packaging, including cartons, parts and instructions manual etc.
3. Customer's response of cost of return shipping, while LD will cover all expense of send out replacement.
4. Any returning must enquire us first, to send back without return ID (given by LD customer service) will not be accepted.
5. Shipping and insurance charges are not refundable.
6. LinkDelight does not has responsibility to response on item lost during returning.
7. Items found not to be defective will be returned at buyer's expense.
   　

Order Cancellation or Delay payment

Lots of eBay venders only emphasize winning bid or ‘buy it now' equates binding contract to purchase the item, however, LD acknowledges that in some cases customers may unable to finish payment or delay it because unpredictable reasons. Simply let we know this, LD will handle eBay trivia, BTW, it doesn't imply we are softhearted to purposive unpaider.

B2B

　 Who are we? A show-case center all about LinkDelight 　 　 Guides & Reviews about photographic equipments, tips and knowledgement 　 　 Get quick answer of products, orders, shipment, store terms and more basic infor-mation 　 　 Subscribe weekly news about latest items, price discount and more shopping pulse in LinkDelight 　 　 　 Category | Hot news | FAQs | Consignment | Buyer Confidence | Payment | Terms & Policy | About Us 　 　 Copyright ©2008 Linkdelight. All rights reserved. Back to Top ∆