dslra store 新增網頁1

TTL flash unit is a "FULL AUTO" flash unit which let you no need to calculate the complex exposure value and the distance from object by the guide number (GN). TTL flash unit will calculate the complex value automatically through the TTL system and give a properly lighting output for each shot.

This TTL flash unit come with Dual Mode as TTL Mode and Manual Mode. If you don't want to use TTL or manual lighting is more proper in the case, you could switch the flash unit to manual mode and adjusting the output lighting manually. There are 7 levels adjustment for lighting output in manual mode.

The Great Features of this TTL flash unit is its Auto Zoom (24mm - 85mm) flash head. The inner flash head will move forward and backward automatically along the changes of the lens focusing.

Another great features as below:

1) Built-in optical sensor - This TTL flash unit can be a slave flash also which triggering by your camera's built-in flash or another external flash.

2) 7-step +/- ev adjustment - In TTL mode, you could fine tune the output lighting manually. The output lighting could be adjusted to -1.5ev, -1.0ev, -0.5ev, 0ev, +0.5ev, +1.0ev or +1.5ev

3) Built-in AF Assist LED - which help and useful for the camera focuses in gloomy environment.

4) Support rear-curtain sync & exposure bracketing (FEB)

More, this TTL flash unit also come with 5 value accessories in FREE of charge. They are built-in bounce card and wide angle cover, flash stand, diffuser dome and soft case.

　

　

Features: Ultra powerful : This flash unit come with high GN number, the GN number is 33 (full power output). Dual mode : Support TTL mode as well as Manual mode. 7 levels adjustment : S1, S2, M (manual) mode support 7 levels lighting output. Auto Zoom : The inner flash head will move forward and backward automatically along the changes of the lens focusing. Built-in AF assist LED : The built-in AF assist LED which help and useful for the camera focuses in gloomy environment. Built-in optical sensor : This TTL flash unit can be a slave flash also which triggering by your camera's built-in flash or another external flash. 7-step +/- ev adjustment : In TTL mode, you could fine tune the output lighting manually. The output lighting could be adjusted to -1.5ev, -1.0ev, -0.5ev, 0ev, +0.5ev, +1.0ev or +1.5ev Fast recycle time :

If 4 alkaline batteries (full-power) have been used on this flash unit, the recycle time only 5 sec.

(The recycle time will be gradual longer along the batteries power reducing) Power save mode :

"TTL" or "M" indicator LED will become twinkle.

(recall by press the camera's shutter release button or press the flash unit's "PILOT" button)

Dual rotatable flash head : The flash head of this flash unit can be rotated both of horizontal (10-angles) and vertical (5-angles). 5 FREE value accessories :

1 x built-in bounce card, 1 x built-in wide angle cover, 1 x diffuser dome, 1 x flash stand and 1 x soft case totally 5 FREE flash accessories are included.

Compatible with:

Canon XSi / XS / T1i / T2i / 450D / 1000D / 500D / 550D

Canon 30D / 40D / 50D

Canon XTi / 400D (XTi & 400D not support Manual Mode)

YN467 TTL Flash Unit Control Panel 　 　

TTL mode

- Turn on the unit by the control wheel (1).

- Switch to TTL mode by the mode switching button (2).

- The TTL indicator (3) will come on.

- The ready indicator (4) will come on in green (charging)

then red (ready).

7-step +/- ev adjustment

- Rotate the control wheel (1) until the middle LED comes on (5).

- To adjust - ev, rotate the control wheel (1) to left.

- To adjust + ev, rotate the control wheel (1) to right. 　 　

M mode (manual mode)

- Turn on the unit by the control wheel [1].

- Switch to M mode by the mode switching button [2].

- The M indicator [3] will come on.

S1 / S2 mode

- Turn on the unit by the control wheel [1].

- Switch to S1 / S2 mode by the mode switching button [2].

- The S1 / S2 indicator [3] will come on.

S1 --- Remote slave mode 1

triggering by regular / manual flash unit or manual mode of TTL

unit remotely by the optical control sensor.

S2 --- Remote slave mode 2

triggering by TTL flash unit (e.g. E-TTL, i-TTL) remotely by the

control sensor.

7 levels output power control

- The first LED (1/64) will comes on [4] when the mode is switched

to M / S1 / S2 mode.

- Rotate the control wheel [1] to adjust the output power. Specifications: Model: YN467 (For Canon / E-TTL) Compatible with:

Canon XTi / 400D (XTi & 400D not support Manual Mode)

Canon XSi / XS / T1i / T2i / 450D / 1000D / 500D / 550D

Canon 30D / 40D / 50D GN: 33 Mode:

TTL (auto) / M (manual)

S1 (remote slave 1) / S2 (remote slave 2) Auto Zoom Range: 24mm - 85mm Power Output Control:

7-step +/- ev (at TTL mode only):

-1.5ev, -1.0ev, -0.5ev, 0ev, +0.5ev, +1.0ev, +1.5ev

7 levels output (at M / S1 / S2 mode):

1/1 (full power), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64

Color Temp.: 5600K

Recycle time:

5 sec (base on 4 pcs FULL-POWER alkaline batteries) Flash Duration: 1/800s - 1/20000s Circuit design: Insulated Gate Bipolar Transistor (IGBT) Rotatable Flash Head:

Vertical: 0 to 90 degree (5-angles)

Horizontal: 0 to 270 degree (10-angles) Power supply: 4 x AA batteries (not included) Power save mode:

"TTL" or "M" indicator LED will become twinkle

(recall by press the camera's shutter release button or press

the flash unit's "PILOT" button)

Flashing times:

100 - 1000 times (base on 4 pcs FULL-POWER alkaline batteries)

Dimension: 72mm x 135mm x 85mm Net weight: 250g Package Contents:

1 x Flash unit

1 x English Manual

1 x Bounce card (built-in)

1 x Wide angle cover (built-in)

1 x Flash stand (FREE included)

1 x Soft case (FREE included)

1 x Diffuser dome (FREE included)

Shipping Policy

• Purchased item(s) will be shipped within 1-2 working days by airmail from Hong Kong after payment settled.
• We offered standard flat rate for the shipping charge to worldwide.
• The delivery time will be 4 to 14 working days approximately and it will be depended on different destination.
• Purchased item(s) will be shipped with bubble padded protection.

Sales Policy

• All products are 100% brand new and QC passed.
• In case of the merchandise to be defective or malfunction during delivery, buyer need to prove it within 30 days from the date of purchase.
• We are not responsible for any merchandise that is abused, intentionally or artificially damaged.

Payment Method

• PayPal only.
• We accept USD, AUD, GBP and CAD payment.
• Thank you for your purchase.

Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.